Hudson M1A1 Thompson ***Originally posted by Claymore***
Finally i got to do some vid of this model, this is a model i have had for some years now and never been able to get it to work. The problems with it have been well discussed so i wont repeat them, this one has 8ace's steel bolt in it which makes a huge difference (cheers 8ace) and the det pin has screw lock glue on it as you can see it fires fine there is however still one problem and thats the magazine, they really are way to weak and allow rounds to pop up which causes jams. you can play areound with the mag lips and get it working with a full mag but it does not last long before the rounds start popping out and jamming up, i found that if i kept the mags down to around 12 13 rounds i could fire fine anymore and the first few rounds would pop out (and i have already cut the springs a bit). So if anyone can come up with a better mag that works i will be the first to buy.
Claymore
Refer to
http://mp40modelguns.forumotion.net/modelgun-videos-f2/hudson-m1a1-thompson-originally-posted-by-claymore-t58.htm for continuing discussion
Subject: Hudson M1A1 Thompson ... Videos... 
Fri Oct 03, 2008 4:48 pm
