MP40's Modelguns Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.
MP40's Modelguns Forum

International Forum for Modelgun enthusiasts
 
HomeLatest imagesRegisterLog in

 

 MGC68 MP40.... Which Part???

Go down 
AuthorMessage
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitimeSat Sep 06, 2008 10:49 am

Post by schultzsgt

I am missing this part for my mgc68 mp40 only thing is I can't remember if its part A or Part B which one should I try and find? Also where can I get this piece? Barring that does anyone have the dimensions of this part and a good clear picture or drawing I could probably get one of the students in the tech dept at the high school to machine one for me. Here's the cropping of the part I need from the manual that was posted. Any help will be greatly appreciated thank you in advance.... Harold
mgc mp40 - MGC68 MP40.... Which Part??? Missingpart
_________________
mgc mp40 - MGC68 MP40.... Which Part??? Haroldsig
Back to top Go down
https://mp40modelguns.forumotion.net
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: Re: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitimeSat Sep 06, 2008 10:50 am

post by Mark

The part(s) that the drawing illustrate(s) is the "detonator/detonators" I am not quite sure just why there are two styles of the detonators shown. As there was supposedly only one style of detonator available when the MGC mp40 was being produced: The "paper" cap style detonator. I am sure that Shazib or Francky might be able to identify the two detonators that the instructions show. Also, either Francky or Shazib should be able to obtain reproductions of the detonators as well as the proper MGC cartridges.
_________________
Wanted to buy: MGC Sten MK3....trades?(still)

MGC MP40 Marushin MP40 Nakata MP40 TRC MP40

Modelgun manufacturers, past and present:CMC,CAW,Hudson,HWS,LS,MGC(R.I.P. 1960's~2007) Marushin,Marui,Kokusai,Shoei,Tanaka and Western Arms
Back to top Go down
https://mp40modelguns.forumotion.net
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: Re: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitimeSat Sep 06, 2008 10:51 am

Post by Doc

This part is only required if you are planning to fire cartridges .

As Mark Says Francky or Shazib sells the new type for use with p220 cartridges

mgc mp40 - MGC68 MP40.... Which Part??? MGCMP40Detonatornew

The old type is this :
mgc mp40 - MGC68 MP40.... Which Part??? MGCMP40Detonatorold

A = bit less than the width of the hole through your trunnion
B = smaller than the diameter of the inside of the trunnion where the barrel sits .

like I say though these parts are only required if you are planning to fire anything .

If you are after one because your barrel moves in and out then make a washer up the depth of the travel of the barrel .

DOC

Edit : pic of the original carts
mgc mp40 - MGC68 MP40.... Which Part??? MGC9mmcarts
_________________
We need guns...lots of guns....

.... well anything mechanical that can kill people is interesting ...
Back to top Go down
https://mp40modelguns.forumotion.net
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: Re: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitimeSat Sep 06, 2008 10:52 am

Post by schultzsgt



I'm not sure if I will ever fire it but I would like to restore this mp40 back to what it was when I bought it way back in 1974. It has seen alot of play with my kids and parts went missing and some had been broken. I have restored it as best I could just need a couple items yet like this piece and a magazine. Useing a dummy magazine right now that I made from basswood, autobody metal, and plastic
_________________
mgc mp40 - MGC68 MP40.... Which Part??? Haroldsig
Back to top Go down
https://mp40modelguns.forumotion.net
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: Re: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitimeSat Sep 06, 2008 10:52 am

Post by schultzsgt

If anyone has this part could impose upon you for the following measurements.
Lengths: A, B, C, D
Diameters: E, F, G, H
With these measurements I can have one machined locally. Again Thank You in advance
mgc mp40 - MGC68 MP40.... Which Part??? MGCMP40part-2
_________________
mgc mp40 - MGC68 MP40.... Which Part??? Haroldsig
Back to top Go down
https://mp40modelguns.forumotion.net
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: Re: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitimeSat Sep 06, 2008 10:53 am

Post by Doc

A = 19mm
B = 10mm
C = 6mm
D= 5mm

E = 8mm
F = 10mm
G = 18mm
H = 10mm

Also the hole you see is 3mm and from this to the back is drilled out to 5mm there is also a hole 3.25 mm in the front end that extends inside only 8mm (does not meet the other hole through the rest of it)

DOC
_________________
We need guns...lots of guns....

.... well anything mechanical that can kill people is interesting ...
Back to top Go down
https://mp40modelguns.forumotion.net
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: Re: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitimeSat Sep 06, 2008 10:54 am

Post by Mark

schultzsgt wrote:
I'm not sure if I will ever fire it but I would like to restore this mp40 back to what it was when I bought it way back in 1974. It has seen allot of play with my kids and parts went missing and some had been broken. I have restored it as best I could just need a couple items yet like this piece and a magazine. Using a dummy magazine right now that I made from basswood, auto body metal, and plastic
Typically, these exported MGC mp40's did not include the detonators as they where sold as "decorator" grade replicas not as modelguns. So, unless your MGC mp is an extremely rare example or you simply want a detonator in it, i would just make one of these:
mgc mp40 - MGC68 MP40.... Which Part??? Falsedetonatormgc002
This is an original plug that MGC made to properly space the barrel on the exported mp's They are as you can see, just an un-finished detonator assy. Every one of my MGC made mp40's have had this style of plug in them when i received them.
mgc mp40 - MGC68 MP40.... Which Part??? Falsedetonatormgc006
It is a shame that MGC just didn't install the real detonators in all of the mp's that they made during their production, as it would have made things easier!
mgc mp40 - MGC68 MP40.... Which Part??? Falsedetonatormgc007
Back to top Go down
https://mp40modelguns.forumotion.net
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: Re: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitimeSat Sep 06, 2008 10:54 am

Post by schultzsgt

When I bought it the hobby shop ordered it in from where I'm not sure but it did come with a box of bullets like the picture above and some caps. Once the caps were gone I tried to use the round caps for cap guns but they never worked well. The would go off with a nice bang but wouldn't cycle the gun.
Again thank you for the measurements
_________________
mgc mp40 - MGC68 MP40.... Which Part??? Haroldsig
Back to top Go down
https://mp40modelguns.forumotion.net
Sponsored content





mgc mp40 - MGC68 MP40.... Which Part??? Empty
PostSubject: Re: MGC68 MP40.... Which Part???   mgc mp40 - MGC68 MP40.... Which Part??? Icon_minitime

Back to top Go down
 
MGC68 MP40.... Which Part???
Back to top 
Page 1 of 1
 Similar topics
-
» My MGC68 MP40
» MGC68 MP40 ... Registry
» MGC68 MP40
» mp40 mgc68
» FS MGC68 MP40

Permissions in this forum:You cannot reply to topics in this forum
MP40's Modelguns Forum :: Modelgun General Discussion-
Jump to: