MP40's Modelguns Forum

International Forum for Modelgun enthusiasts
 
HomeFAQRegisterLog in

Share | 
 

 Sample entry, template for submissions

View previous topic View next topic Go down 
AuthorMessage
smootik
Modelgun Perfectionist
Modelgun Perfectionist
avatar

Number of posts : 1783
Location / Country : Poland
Registration date : 2009-03-04

PostSubject: Sample entry, template for submissions   Tue Sep 14, 2010 11:02 pm

This is a sample entry to show what information is required for a submission.
See below for explanations.



manufacturer
name:
caliber:
size:
type:
designation:

usage
main:
compatible:

dimensions
length:
diameter:

construction
parts:
caps:
o-ring:

comments
warning:
note:



Manufacturer
name: write short name of manufacturer here. Examples: MGC, Tanaka, Marushin, CAW.
caliber: provide caliber of the original ammunition. Examples: .45, .380ACP, 9mm Luger
type: one from the list available on explanations page. Examples: CP-HW, PFC, dummy
designation: very important information! this is how manufacturer marks type of cartridges. This is usually found on cartridge box. If you are unsure what to use, photo of the box can help. Example: "Cal.45 SMG", "50AE Blow Back New PFC"

Usage
main: which modelgun is this cartridge designed for. If multiple modelguns use the same cartridge, create more "main:" lines with one model per line. Example: "MGC Thompson M1921A1"
compatible: (optional) if it is confirmed that a cartridge works correctly in another modelgun, please list it here. Example: "Hudson Thompson M1928"

Dimensions
length: full length, in milimeters, when assembled. Measure several cartridges, take average. Example: "30mm"
diameter: diameter of the main part, not rim. If cartridge is tapered, take the largest diameter. Measure several cartridges, take average. Example: "12mm"

Construction
parts: put here number of parts making the cartridge, including o-rings and caps used as seals, excluding live caps. Follow by colon and comma-separated names of parts. Example: "5:top,bottom,insert,pin,o-ring"
caps: list live caps that go inside cartridge to make it fire. Examples: "7mm", "7mm+5mm", "2x5mm"
o-ring: (optional)if you know outside diameter (OD) and thickness (second parameter) of o-rings used in cartridge, please provide it here. Example: "5x3mm"

Comments (optional)
note: (optional)write any comments you might have here. One per "note:" entry, multiple entries allowed. Example: ""
warning: (optional)write any warnings here. One per "warning:" entry, multiple entires allowed. Example: "Rusts easily", "Do not confuse with similar XYZ cartridge"
Back to top Go down
View user profile
 
Sample entry, template for submissions
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Sydney Track Classic ENTRY LIST - Sat March 19th
» Duathlon training schedule
» IAAF World Champs Entry Standards
» Bargain Entry-Level Pistols
» Flinders Entry Lists & SCHEDULE OF EVENTS

Permissions in this forum:You cannot reply to topics in this forum
MP40's Modelguns Forum :: Modelgun Caps, Cartridges and Magazines :: Cartridge Library ***NEW***-
Jump to: