MP40's Modelguns Forum

International Forum for Modelgun enthusiasts
 
HomeFAQRegisterLog in

Share | 
 

 Marushin 9.5x25 for MKK P38

View previous topic View next topic Go down 
AuthorMessage
smootik
Modelgun Perfectionist
Modelgun Perfectionist
avatar

Number of posts : 1783
Location / Country : Poland
Registration date : 2009-03-03

PostSubject: Marushin 9.5x25 for MKK P38   Tue Sep 14, 2010 7:25 pm

Cartridge: Marushin 9.5x25 for MKK P38


ManufacturerMarushin
Designation9.5x25 for MKK P38
TypePFC
Carts per box5
Length24.6mm
Diameter9.5mm
Weight7.71
Parts3 (top, bottom, piston)
O-ring sizeunknown
Caps7mm
------
Used in:Marushin Walther P-38


Note: Older style, with a single-piece bottom. Newer types have a removeable bottom insert with additional o-ring. Change was done to make easier cleaning.


Warning! Bottom pin is a steel insert and it rusts VERY quickly. Always thoroughly dry after cleaning, store in a dry place. Rust not only looks bad, but it will also make pits and dents and eventually make pin too weak/thin to work.


Back to top Go down
View user profile
smootik
Modelgun Perfectionist
Modelgun Perfectionist
avatar

Number of posts : 1783
Location / Country : Poland
Registration date : 2009-03-03

PostSubject: Re: Marushin 9.5x25 for MKK P38   Tue Sep 14, 2010 7:25 pm

This post is reserved for photos and drawings.









Back to top Go down
View user profile
 
Marushin 9.5x25 for MKK P38
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
MP40's Modelguns Forum :: Modelgun Caps, Cartridges and Magazines :: Cartridge Library ***NEW***-
Jump to: