MP40's Modelguns Forum

International Forum for Modelgun enthusiasts
 
HomeFAQRegisterLog in

Share | 
 

 the do all beat all thread of "what real parts will fit a marushin m16"

View previous topic View next topic Go down 
AuthorMessage
napalm113
New Member
New Member


Number of posts : 23
Location / Country : usa
Registration date : 2012-03-25

PostSubject: the do all beat all thread of "what real parts will fit a marushin m16"   Wed Apr 18, 2012 5:09 pm





real pistol grip will fit with no modification, real stock will fit with a little material scraped off the grove.

hand guards required extending the barrel 1/4 inch. I made a steel drop in barrel.

real trigger guard fits with no modification. a real mag release can be fitted, but wont hold a magazine. drilling out selector divot 1/8 then 3/32 allows it ti fir a real sector divot and spring. the real magazine will fit, but wont lock unless the bolt is to the rear. if you bore out a steel hammer it will engage the trigger, but not the disconnect.

real sights will fit if you drill recesses into the upper receiver, it is slightly wider than real thing. the real forward assist will work but requires you bore out the hole its in slightly. real ejection port cover will fit but wont stay closed.
Back to top Go down
View user profile
napalm113
New Member
New Member


Number of posts : 23
Location / Country : usa
Registration date : 2012-03-25

PostSubject: Re: the do all beat all thread of "what real parts will fit a marushin m16"   Wed Apr 18, 2012 5:16 pm

also, a real charging handle will fit if you file off the tabs on front. but then it falls down when you lock the bolt to the rear and slide it forward.
Back to top Go down
View user profile
napalm113
New Member
New Member


Number of posts : 23
Location / Country : usa
Registration date : 2012-03-25

PostSubject: Re: the do all beat all thread of "what real parts will fit a marushin m16"   Sat May 05, 2012 5:48 am



i updated the color too.
Back to top Go down
View user profile
josh676
Modelgun Enthusiast
Modelgun Enthusiast


Number of posts : 175
Location / Country : Australia
Registration date : 2012-05-14

PostSubject: Re: the do all beat all thread of "what real parts will fit a marushin m16"   Mon Sep 03, 2012 9:48 am

I just got my M16A1 and M655, love them with the exception of the ABS stock and foreguard, will the airsoft equivs fit on them? And will they feel of a higher quality? it really lets the whole gun down.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: the do all beat all thread of "what real parts will fit a marushin m16"   

Back to top Go down
 
the do all beat all thread of "what real parts will fit a marushin m16"
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Plog!! (power log thread)
» Custom Chassis Build Thread
» The Costume Thread....
» The Home Audio thread
» The Official Polo Shirt Thread...

Permissions in this forum:You cannot reply to topics in this forum
MP40's Modelguns Forum :: Marushin Modelguns :: Marushin M16/XM177 Series Modelguns-
Jump to: