Marushin Beretta M92FS

Hi,
From the Hammer of my Beretta is a round piece of metal which hits the Firing Pin lost.Now the gun does not work. Does anyone know a solution to my problem?
(Sorry for my bad English)
Greetings

Hi,

I don't have the missing part, but I'll help to identify it.

Is it part number 10 from this diagram.
https://mp40modelguns.forumotion.net/t2756-marushin-m9-center-fire-gun-kit

Regards

8ace

Hello,

I am not firm with the Marushin Beretta; for me it looks, that part no. 29 is involved.
The mentioned metal insert is not listed in the view drawing.
Maybe the Marushin constructers look at it as one unit with the hammer, wa?!

Regards
Jati

Again I'm not 100% sure but it looks like the hammer has been drilled out (or worn out badly). It'll need a new hammer (part 29) or you could fill the hole with a metal insert.

A metal epoxy might work as a fill material, but it could crack when it strikes the firing pin.

8ace

I'm not a Marushin expert either, but I've seen many model gun hammers with an insert in that area that I believe is to be of harder material than the rest of the hammer, which is made of zinc.

Best option is probably to get a replacement hammer if you can.

If that's not an option, you'll probably need to custom fit and secure a small metal disc in place of the one that has fallen out.

Good luck!