MP40's Modelguns Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.
MP40's Modelguns Forum

International Forum for Modelgun enthusiasts
 
HomeLatest imagesRegisterLog in

 

 Tanaka Evolution 2 - 9mm

Go down 
AuthorMessage
Cerwyn
Cerwyn (Site Admin)
Cerwyn (Site Admin)
Cerwyn


Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

Tanaka Evolution 2 - 9mm  Empty
PostSubject: Tanaka Evolution 2 - 9mm    Tanaka Evolution 2 - 9mm  Icon_minitimeSun Mar 12, 2017 9:07 am

Originally posted by JohnnyV


Well thoughts on new "evolution 2" cartridges, fist they do not have the nice silver bullet heads as on the older ones, which is a shame.. However they are a lot lighter so should eject better!
Next the "cross cut" in the inner tube of the evolution one carts has gone again, I believe this cross cut was put there to allow a little gas to escape just before the piston cleared the "bore" of the inner tube to prevent the oring blowing off under sudden release. The New EVO " carts achieve the same thing without the cross cut by the top of the inner bore being countersunk, and the piston has "cuts" in the front face, giving the same effect as the crosscut. There is also now an EXTRA oring on the outside top of the inner tube which forms a seal between the tube and bullet head, I guess to stop gas going back down the outside of the inner tube as the piston clears the bore. I will post a pic
Tanaka Evolution 2 - 9mm  20170310

_________________
Cerwyn

Hobby collector of Replica model guns and Militaria.
also member of Living History Reenactment Groups.
Back to top Go down
https://mp40modelguns.forumotion.net
 
Tanaka Evolution 2 - 9mm
Back to top 
Page 1 of 1
 Similar topics
-
» Tanaka sig 226 evolution
» Do you know "TANAKA USP evolution"
» Differences between Tanaka 9mm and 9mm "Evolution"
» Tanaka 9x19 versus Tanaka 9x19 evolution
» Tanaka 9mm Evolution Cartridge

Permissions in this forum:You cannot reply to topics in this forum
MP40's Modelguns Forum :: Modelgun Caps, Cartridges and Magazines-
Jump to: