Number of posts : 68 Age : 62 Location / Country : england Registration date : 2009-06-20
Subject: 2 caps to a shell / open carts !! Sat Aug 09, 2014 3:13 pm
Hi Gang , I would like to know how to put 2 caps 7mm and 5mm into one cartridge , the marushin car 15 I have apparently requires 2 and im not sure how to fit them !! , also I have an MGC mac 10 ingram with the early style , I think , open carts , and it is not firing on full auto , well ok its not blowing back , its going phut , but no blowback !! , any advice will be appreciated , thanks very much , Richard
8ace Modelgun Perfectionist
Number of posts : 2554 Location / Country : UK Registration date : 2008-08-06
Subject: Re: 2 caps to a shell / open carts !! Sun Aug 10, 2014 4:36 pm
Number of posts : 11075 Age : 65 Location / Country : North Wales Registration date : 2008-07-20
Subject: Re: 2 caps to a shell / open carts !! Mon Aug 11, 2014 9:58 am
Hi Richard
Regarding your MAC11, do you have the correct detonator pin fitted to match the open carts? The Det.Pin has a wider mushroom shaped head that acts as the seal for blowback. If you've got a standard CP Pin all you'll get is a "phut" and no blowback
_________________ Cerwyn
Hobby collector of Replica model guns and Militaria. also member of Living History Reenactment Groups.
richard frizzell New Member
Number of posts : 68 Age : 62 Location / Country : england Registration date : 2009-06-20
Subject: mac 11 Tue Aug 12, 2014 3:23 pm
Thanks Cerwyn for the reply , not sure mate , I will strip it down and have a look !! , what cartridges do I need if its the other !! , thanks Richard
Cerwyn Cerwyn (Site Admin)
Number of posts : 11075 Age : 65 Location / Country : North Wales Registration date : 2008-07-20
Subject: Re: 2 caps to a shell / open carts !! Tue Aug 12, 2014 4:48 pm
Hi Richard,
If your MAC11 has the straight Det.Pin, these are the MGC CP cartridges you'll need:
Several types of MGC cartridges can be extremely difficult, if not impossible to get hold of since MGCs closure though. Fortunately, Tanio Koba have produced a new cartridge and Det. Pin design suitable for the MGC MAC11 :
Sat Aug 09, 2014 3:13 pm
