MP40's Modelguns Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.
MP40's Modelguns Forum

International Forum for Modelgun enthusiasts
HomeLatest imagesRegisterLog in


 Hudson PPSh41

Go down 
Cerwyn (Site Admin)
Cerwyn (Site Admin)

Number of posts : 11073
Age : 65
Location / Country : North Wales
Registration date : 2008-07-20

Hudson PPSh41 Empty
PostSubject: Hudson PPSh41   Hudson PPSh41 Icon_minitimeWed Aug 06, 2008 10:14 am

Hudson PPSh41

Here's a short clip of my Hudson PPSh41 after some serious modifications were done to correct the design faults this model seems to be inflicted with!

The new style lightweight bolt was replaced by the older and heavier one.
The old bolt was broken, the 2 "prongs" on the bolt face had snapped off and the extractor was broken too. These are common problems with the PPSh41.
Kickback made me a steel insert to replae the "prongs", and a new steel extractor.
8ace made me a new Detonator Pin to suit the MGC .38Super cartridges used.
Hudson may well have modified the magazine internally recently as the .38Super carts had to have the rims machined down to the same diameter as the case body otherwise they wouldn't feed through the mag'. Thanks again 8ace!

Here goes...

Hudson PPSh41 Th_PPSh41ashorttaster

Click here to View:

My thanks to Kickback, 8ace, Claymore and to Carol without whom this production would not have been possible! Very Happy Very Happy Very Happy

Back to top Go down
Hudson PPSh41
Back to top 
Page 1 of 1
 Similar topics
» hudson ppsh41
» Hudson PPSH41
» Hudson's PPSh41
» Hudson PPSh41
» Hudson PPSh41 Falling Apart...

Permissions in this forum:You cannot reply to topics in this forum
MP40's Modelguns Forum :: Modelgun Videos-
Jump to: