Hi all,
I have seven or eight modelguns and only two of them works perfectly : JASG S&W M10 and my Tanaka Glock 17. I have a project to make a short movie in the coming months and I need those modelguns to work. I will update this topic regularly.
I will start with the Hudson AK-47 : it was a second hand I bought last year. I barely used it, just test it with two old but original carts last year. 8ace was able to provide new carts
Problem 1 : not solvedI can't load 30 rounds. The tension is too high. Carts get stucked. I have noticed that it is deformed a little bit. Or is it normal ? The more carts I load, the more force I have to put to remove a cart from the magazine.
I have also noticed that this deformed part will block the carts when they will be chambered.
I have noticed as welll a gap in the magazine.
Maybe this is normal ?
Problem 2 : solvedWhen a cart is chambered, it will get stuck inside. Each time I have to dismantle everything and remove it with a pincer. This is definitively not normal.
Edit : I found the origin of the problem. The detonator pin is damaged and creates irregularity that will block the tips of the carts. I have another problem with some of the tips of my custom carts. They will not fit the detonator pin at all but it will be fix thanks to 8ace.Problem 3 : not solvedHandguard is moving but I don't think it is a bigdeal.
==========
Next modelgun, Marushin S&W M39 : Bought here one or two year ago. It was sold with weird carts but definitively not genuine. Shazhib was able to provide me 15x original PFC.
Problem 1 : solvedCarts always get stucked in the chamber. I have to remove it with a pincer.
Edit : I removed the detonator pin and found out that when you insert it into the top of a cart, it will touch and make friction. So I reduced very slightly the diameter of the detonator pin. Now it will insert more smoothly.Problem 2 : not solvedCarts will jam when loading. When making a dry cycling without caps, carts will eject most of the time correctly but sometimes it will jam.
Problem 3 : not solvedI have noticed that the cart on top of the magazine is never straight.
It should be parallel with the other carts isn't it ?
Next coming soon...