smootik
Modelgun Perfectionist
Number of posts : 1823
Location / Country : Poland
Registration date : 2009-03-03
 | Subject: Hudson Skorpion vz61  Tue Sep 14, 2010 7:15 pm | |
| Cartridge: Hudson Skorpion vz61
| Manufacturer | Hudson | | Designation | Skorpion vz61 | | Type | Hudson | | Carts per box | 6 | | Length | 23.5mm | | Diameter | 8mm tapering to 7.42mm at tip | | Weight | 6g | | Parts | 4 (top, bottom, piston pin, o-ring) | | O-ring size | unknown | | Caps | 5mm | | --- | --- | | Used in: | Hudson Skorpion vz.61 |
Note: Cartridge diameter tapers from 8mm rear to 7.42mm front. The Detonator Chamber is tapered to suit. Note: MGC 7.65mm Luger P08 (abs) CP-HW can be used but a Detonator Chamber & Pin need making to suit. (use MGC P210 carts) However these are not tapered and may not stack properly in the magazine. Note: Original design is prone to problems - o-ring gets damaged very quickly as it travels past hole in the top part of the cartridge. Note: see https://mp40modelguns.forumotion.net/t1692-vz61-scorpion-cartridge-swap#20910
Last edited by Cerwyn on Tue Aug 20, 2013 10:42 am; edited 4 times in total (Reason for editing : Taper detail added, MGC Luger 7.65mm (abc) CP-HW note added) | |
|
smootik
Modelgun Perfectionist
Number of posts : 1823
Location / Country : Poland
Registration date : 2009-03-03
| |
