smootik
Modelgun Perfectionist
Number of posts : 1823
Location / Country : Poland
Registration date : 2009-03-03
 | Subject: Marushin 7.63 Mauser (9.5x32) (for M712)  Tue Sep 14, 2010 7:24 pm | |
| Cartridge: Marushin 7.63 Mauser (9.5x32) (for M712)
| Manufacturer | Marushin | | Designation | 7.63 Mauser (9.5x32) (for M712) | | Type | PFC | | Carts per box | 5 | | Length | 31.7mm | | Diameter | 9.4mm | | Weight | 9.44g | | Parts | 3 (top, bottom, piston) | | O-ring size | unknown | | Caps | 7mm | | --- | --- | | Used in: | Marushin Mauser M712 |
Warning! Bottom pin is a steel insert and it rusts VERY quickly. Always thoroughly dry after cleaning, store in a dry place. Rust not only looks bad, but it will also make pits and dents and eventually make pin too weak/thin to work.
Last edited by smootik on Sat Sep 18, 2010 11:10 pm; edited 1 time in total | |
|
smootik
Modelgun Perfectionist
Number of posts : 1823
Location / Country : Poland
Registration date : 2009-03-03
| | Subject: Re: Marushin 7.63 Mauser (9.5x32) (for M712) Tue Sep 14, 2010 7:24 pm | |
| | |
|
c_alexandersen
Modelgun Master
Number of posts : 294
Location / Country : Denmark
Registration date : 2011-11-30
| | Subject: Drawings Thu Sep 13, 2012 8:31 pm | |
| DISCLAIMER Uploaded drawings are made from measuring samples in my possession. Drawings are intended as information and means for comparing the different cartridges. No scale is given on drawings though most are app. 4:1 when printed on paper size A4 Distance between striker and cap is 0,5mm in all drawings. If you have wishes for additional views or dimensions send me a PM and I will have a look at it as my time permits.   | |
|
Sponsored content
| | Subject: Re: Marushin 7.63 Mauser (9.5x32) (for M712) | |
| |
|
