smootik
Modelgun Perfectionist
Number of posts : 1823
Location / Country : Poland
Registration date : 2009-03-03
 | Subject: Marushin M16/XM177  Tue May 10, 2011 3:23 pm | |
| Cartridge: Marushin (M16A1*M655*XM177E2) 9.5x45mm
| Manufacturer | Marushin | | Designation | (M16A1*M655*XM177E2) 9.5x45mm | | Type | PFC | | Carts per box | 5 | | Length | 45mm | | Diameter | 9.45mm | | Weight | 12.4g | | Parts | 3 (top, bottom, piston) | | Caps | 7mm+5mm or 2x7mm | | --- | --- | | Used in: | Marushin M16A1, Marushin M655, Marushin XM177E2 |
Note: These can be loaded with one 7mm and one 5mm cap, or two 7mm caps. The first option has been tested to work well, but in the later version of the manual Marushin removed it, leaving only 2x7mm option. Note: Modify-Tech manufacture a copy replacement cartridge
Warning! Bottom pin is a steel insert and it rusts quickly. Always thoroughly dry after cleaning, store in a dry place. Rust not only looks bad, but it will also make pits and dents and may eventually make pin too weak/thin to work.
| |
|
smootik
Modelgun Perfectionist
Number of posts : 1823
Location / Country : Poland
Registration date : 2009-03-03
| |
c_alexandersen
Modelgun Master
Number of posts : 294
Location / Country : Denmark
Registration date : 2011-11-30
| | Subject: Drawings Fri Sep 21, 2012 7:39 pm | |
| DISCLAIMER Uploaded drawings are made from measuring samples in my possession. Drawings are intended as information and means for comparing the different cartridges. No scale is given on drawings though most are app. 4:1 when printed on paper size A4 Distance between striker and cap is 0,5mm in all drawings. If you have wishes for additional views or dimensions send me a PM and I will have a look at it as my time permits.   | |
|
Sponsored content
| | Subject: Re: Marushin M16/XM177 | |
| |
|
