Tanaka 9mm Evolution Cartridge

Subject: Tanaka 9mm Evolution Cartridge Fri Apr 27, 2012 6:16 pm

Cartridge: Tanaka "Evolution" 9mm

Manufacturer	Tanaka
Designation	9mm Evolution
Type	Tanaka
Carts per box	15
Length	27.55mm
Diameter	9.58mm
Weight	11g
Parts	6 (top, bottom, insert, tube, piston pin, o-ring)
O-ring size	o/dia 5mm i/dia unknown thickness unkown
Caps	1 x 5mm
---	---
Used in:	Tanaka 9mm series Glocks, Sig P226

Note: Top part is silver, making the cartridge "real look".
Note: Probably the most complicated cartridge design.
Note: Redesigned to reduce gas-pressure blowback slightly to prevent stress damage to HWABS barrels, slides.
Note: seehttps://mp40modelguns.forumotion.net/t2924-differences-between-tanaka-9mm-and-9mm-evolution

_________________
Cerwyn

Hobby collector of Replica model guns and Militaria.
also member of Living History Reenactment Groups.

Subject: Re: Tanaka 9mm Evolution Cartridge Fri Apr 27, 2012 6:18 pm

JohnnyV wrote:: Difference between the two verions of the cartridge shown below, old type at top, new EVOLUTION type at bottom.
Difference is cross cut in end inner cylinder to allow gas to escape before piston exits bore, and piston redesign.

_________________
Cerwyn

Hobby collector of Replica model guns and Militaria.
also member of Living History Reenactment Groups.

Subject: Re: Tanaka 9mm Evolution Cartridge Sun May 20, 2012 9:45 am

_________________
Cerwyn

Hobby collector of Replica model guns and Militaria.
also member of Living History Reenactment Groups.

» Tanaka sig 226 evolution
» Tanaka Evolution 2 - 9mm
» Do you know "TANAKA USP evolution"
» Tanaka G17 Evolution modelgun
» Tanaka Colt .45 SAA Cartridge