Nakata luger wont reasembly?

Hi guys. I recently bought a Nakata luger artillery model. However when I try to reasembly it after disasembly the little switch at the front that hold the whole thing together wont move. Its like the barrel/mantle wont go back entirely . When I try to take a loading grip the thing moves forward and the handle grip that is suppost to be at the back of the gun is now in the middle?

Would you guys be able to help me? ;D

Hi Sommarkatze,
You may check some parts disposition

Parts 9&24 are maybe misplaced?
Even if Nakata's parts have not the same shape, the disposition and operating are the same, so sometime, during reassembly, the part #9 can be forward the part #24, don't hook normally, and jams the receiver.

Hello Dronne! Thanks for the respond! I doesnt seem to have a part like number 9 and never seen to have? :S

Ah yes, without that part, the spring loading will not pull the toggle back in position.

Hi Sommarkatze
Here's a link to a good explanation of a Luger p08 re-assembly.:
https://www.youtube.com/watch?v=WBP0RX7mctQ
Obviously the firing mechanisim is totally different, but the reassembly shows how part 9 ("S" link) is installed.

I've been fixing my Modelgun Lugers over the weekend and found I have a spare "S" link (part 9) from an early RMI (MGC) metal Luger P08 available.
I don't know if it is interchangeable with a Nakata Luger, but you are more than welcome to it if you can't find a Nakata spare.
PM me with your address and I'll mail it to you.

Cheers.

Kiwigunner

Woaw! For real Kiwi? You are an angel! Thanks alot! I will forever be in dept to you!
However guys when I look at it, it seems like part 24 is missing to? And I it dont seem to be anything more in there? Its just blank? I cant see how anything would fit/connect in there?





Edit: Sorry If the picture is on the side. Big thanks guys!

This is Nakata diagram:


Seems a bit different. For more photos, including disassembled parts see this page:
http://www7a.biglobe.ne.jp/~yon-yon/cgi/nakata/p08/index.html

I just went to my display cabinet, and I have the same type of Nakata Luger.

Unscrew the left side grip to see what parts you have there to make the whole action work.
These work differently to most modelguns. When you pull the trigger, it pulls the toggle mechanism backwards and ejects a brass cartridge, then loads the next one from the magazine.

I opened it up on the sides, I took the springs out and tried to assembly it. And it worked! I put the springs in later and it seems to work now all together. Big thanks to you all!

Cool! Glad to hear that it's back together and working correctly.

Excellent solutions - true International co-operation!

I learned that Nakata P08 Lugers are a totally different design! THANKS GUYS!

Kiwigunner