Cerwyn Cerwyn (Site Admin)
Number of posts : 11090 Age : 65 Location / Country : North Wales Registration date : 2008-07-20
| Subject: Modify-Tech PFC cartridge for Marushin M16/XM177 Fri Feb 21, 2014 11:00 am | |
| Cartridge: Modify-Tech for Marushin (M16A1*M655*XM177E2) 9.5x45mm
Manufacturer | Modify-Tech | Designation | (M16A1*M655*XM177E2) 9.5x45mm | Type | PFC | Carts per box | | Length | 45mm | Diameter | 9.45mm | Weight | n/a | Parts | 3 (top, bottom, piston) | Caps | 7mm+5mm or 2x7mm (see note below) | --- | --- | Used in: | Marushin M16A1, Marushin M655, Marushin XM177E2 |
Note: These can be loaded with one 7mm and one 5mm cap, or two 7mm caps. The first option has been tested to work well, but in the later version of the manual Marushin removed it, leaving only 2x7mm option. Warning! Bottom pin is a steel insert and it rusts quickly. Always thoroughly dry after cleaning, store in a dry place. Rust not only looks bad, but it will also make pits and dents and may eventually make pin too weak/thin to work.
_________________ Cerwyn
Hobby collector of Replica model guns and Militaria. also member of Living History Reenactment Groups.
| |
|
Cerwyn Cerwyn (Site Admin)
Number of posts : 11090 Age : 65 Location / Country : North Wales Registration date : 2008-07-20
| Subject: Re: Modify-Tech PFC cartridge for Marushin M16/XM177 Sun Jul 16, 2017 11:10 am | |
| _________________ Cerwyn
Hobby collector of Replica model guns and Militaria. also member of Living History Reenactment Groups.
| |
|