Marushin MP40 Kit Assembly

Post by Sgt. Guarnere

ok, heres an update, i have put together basicly the whole kit but now i can't seem to get the top and bottom recievers to hook together. i am also having problems trying to keep the pin behind the trigger to stay in place. if someone could post some pictures that would be great, or if you have any other information, i will be very gratefull.

thanks again for you time!
Grant

Post by Mark

Grant,

The upper and lower receivers are sometimes tricky to assemble right as the forward section of the lower has a lip that fits just under the back of the magazine housing. this lip has to be aligned before the upper is fitted to the lower and turned. The trigger needs to be held down while the upper is fitted to the lower, the disasembly knob has to be pulled out and locked in the downward position before the upper can be "twisted" into place...

I guess that i don't quite understand what "pin behind the trigger you mean..
_________________
Wanted to buy: MGC Sten MK3....trades?(still)

MGC MP40 Marushin MP40 Nakata MP40 TRC MP40

Modelgun manufacturers, past and present:CMC,CAW,Hudson,HWS,LS,MGC(R.I.P. 1960's~2007) Marushin,Marui,Kokusai,Shoei,Tanaka and Western Arms