smootik Modelgun Perfectionist
Number of posts : 1823 Location / Country : Poland Registration date : 2009-03-03
| Subject: Hudson 50AE Blow Back New PFC Tue Sep 14, 2010 7:12 pm | |
| Cartridge: Hudson 50AE Blow Back New PFC
Manufacturer | Hudson | Designation | 50AE Blow Back New PFC | Type | CP-HW | Carts per box | 6 | Length | 38.9mm | Diameter | 13.5mm | Weight | 31.6g | Parts | 5 (top, bottom, insert, piston pin, o-ring) | O-ring size | unknown | Caps | 7mm | --- | --- | Used in: | Hudson Desert Eagle .50 |
Note: This time Hudson used MGC design, without any additional holes in the shell. Piston pin does have a hole through it. Warning! These are very heavy cartridges, they may damage things after ejection.
| |
|
smootik Modelgun Perfectionist
Number of posts : 1823 Location / Country : Poland Registration date : 2009-03-03
| Subject: Re: Hudson 50AE Blow Back New PFC Tue Sep 14, 2010 7:12 pm | |
| | |
|
c_alexandersen Modelgun Master
Number of posts : 294 Location / Country : Denmark Registration date : 2011-11-30
| Subject: Drawings Sun Sep 16, 2012 5:40 pm | |
| DISCLAIMER Uploaded drawings are made from measuring samples in my possession. Drawings are intended as information and means for comparing the different cartridges. No scale is given on drawings though most are app. 4:1 when printed on paper size A4 Distance between striker and cap is 0,5mm in all drawings. If you have wishes for additional views or dimensions send me a PM and I will have a look at it as my time permits. | |
|
Sponsored content
| Subject: Re: Hudson 50AE Blow Back New PFC | |
| |
|