smootik Modelgun Perfectionist
Number of posts : 1823 Location / Country : Poland Registration date : 2009-03-03
| Subject: Marushin 9.5x27mm UZI/MP40/SDMK I Tue Sep 14, 2010 7:27 pm | |
| Cartridge: Marushin 9.5x27mm UZI/MP40/SDMK I
Manufacturer | Marushin | Designation | 9.5x27mm UZI/MP40/SDMK I | Type | PFC | Carts per box | 5 | Length | 27.1mm | Diameter | 9.5mm | Weight | 8.5g | Parts | 3 (top, bottom, piston) | O-ring size | unknown | Caps | 7mm | --- | --- | Used in: | Marushin IMI UZI, Marushin MP40, Marushin SD Mk I (?) |
Note: If anyone can explain what "SDMK I" is, he would solve a great mystery :-) Warning! Bottom pin is a steel insert and it rusts VERY quickly. Always thoroughly dry after cleaning, store in a dry place. Rust not only looks bad, but it will also make pits and dents and eventually make pin too weak/thin to work.
| |
|
smootik Modelgun Perfectionist
Number of posts : 1823 Location / Country : Poland Registration date : 2009-03-03
| Subject: Re: Marushin 9.5x27mm UZI/MP40/SDMK I Tue Sep 14, 2010 7:27 pm | |
| This post is reserved for photos and drawings. | |
|
c_alexandersen Modelgun Master
Number of posts : 294 Location / Country : Denmark Registration date : 2011-11-30
| Subject: Drawings Thu Sep 20, 2012 7:12 pm | |
| DISCLAIMER Uploaded drawings are made from measuring samples in my possession. Drawings are intended as information and means for comparing the different cartridges. No scale is given on drawings though most are app. 4:1 when printed on paper size A4 Distance between striker and cap is 0,5mm in all drawings. If you have wishes for additional views or dimensions send me a PM and I will have a look at it as my time permits. | |
|
Sponsored content
| Subject: Re: Marushin 9.5x27mm UZI/MP40/SDMK I | |
| |
|