Number of posts : 2559 Location / Country : UK Registration date : 2008-08-06
Subject: Marushin Enfield No2 MK1 Sat Jan 05, 2019 10:15 am
I'm working on one of these revolvers with firing problems..... it wont
Looking at the firing pin alignment it's a little off the cart primer and I was wondering if anybody has had the same problem?
mystikchepas Modelgun Enthusiast
Number of posts : 139 Location / Country : France Registration date : 2013-05-15
Subject: Re: Marushin Enfield No2 MK1 Mon Jan 07, 2019 7:53 am
I have the same problem but with another revolver. Don't have a lot of time to find a solution yet
jwstacey Modelgun Enthusiast
Number of posts : 35 Location / Country : South Wales Registration date : 2015-10-01
Subject: Re: Marushin Enfield No2 MK1 Mon Jan 07, 2019 10:04 am
I get that problem occasionally with the Enfield. The pin is on a little hinge and the action of the hammer coming down pushes it forward into position. Is the pin stiff on the hammer? it should be loose and move freely up and down.
8ace Modelgun Perfectionist
Number of posts : 2559 Location / Country : UK Registration date : 2008-08-06
Subject: Re: Marushin Enfield No2 MK1 Tue Jan 08, 2019 7:36 am
thanks for the info.
The pin is free to move.
I've a few ideas to sort the problem out but before I redesign a few things I wanted to find out if this issue is common to this model and if there are any standard quick fixes.
Sat Jan 05, 2019 10:15 am
