MGC68 MP40... Working Safety Conversion

Post by Sturmann72


I want to say hi to all members of this interesting forum. I'm new to the community but I have a Q ready for you guys:

Does anyone know if it's possible to modify the fixed lever ( the one cast in one piece) on the MG68 Mp40 to a pull/twist working safety one or if a working one from the Marushin kit (for example) can replace the MGC one.

thanks guys for your time and kindness.

Max

Post by Claymore

welcome to the forums, not sure on this i would say no to the original bolt but if you could get a new bolt made then you could use a marushin safety on that, however the push pull mech of the safety is straight forward as it is only a ball bearing and a spring it depends i think on how long the mgc coking handel is and if you could work it for the plastic safety of the marushin to go over. i will have a look at mine as see if it looks feasable.

Post by Doc

Hi Max .

Welcome to the forums !

In answer to your question : Yes it is and basically all you would need to do is machine /grind/sand away your MGC cocking button so it resembled the internal bit the same as Marushins .

You can strip the part that comes from marushin to see exactly what you need or I can make some measurements/photos if you like

only thing to mention and its quite important .

MGC cocking handles have been known to snap off so bear in mind this part should not be over stressed.

DOC
_________________
We need guns...lots of guns....

.... well anything mechanical that can kill people is interesting ...

Hello Max

Welcome to the forum!

If it's of any help to you, here's a link to Marushins MP40 assembly manual and parts list.

The Cocking handle and Toggle Safety can be ordered as one unit, i.e. part number #33


https://mp40modelguns.forumotion.net/modelgun-instructions-f10/marushin-mp40-abs-t92.htm

http://www.mp40modelguns.com/forum2/viewtopic.php?t=1799

Good luck!

Cerwyn
_________________
Hobby collector of mainly WW2 era uniforms, headgear, field equipment and replica weapons.

Post by Sturmann72

Thank you all for such warm welcome and all the infos you provided. Once my MGC68 arrives I will have a close up inspection to see if I can manage the mod without taking too many risks about braking or snapping any part.
Here in Italy seems everybody is more into softair games other than reenacting, not to mention modelgun collecting. Thanks to the internet we can reach awesome people like you from all over the modelgun world.
Cheers
Max

Post by Mark

Yes, welcome to the forums Sturmann72!

The internet does provide a good way to meet like minded individuals across the world. Sadly though, it doesn't really replace the face to face greetings though!
_________________
Wanted to buy: MGC Sten MK3....trades?(still)

MGC MP40 Marushin MP40 Nakata MP40 TRC MP40

Modelgun manufacturers, past and present:CMC,CAW,Hudson,HWS,LS,MGC(R.I.P. 1960's~2007) Marushin,Marui,Kokusai,Shoei,Tanaka and Western Arms