Note: New style, with dual-piece bottom. Also piston has a groove around it. Note: Fit MGC Beretta 1934 after small modification of nose shape: 0.2mm shorter and more round).
smootik Modelgun Perfectionist
Number of posts : 1823 Location / Country : Poland Registration date : 2009-03-03
This post is reserved for photos and drawings. Note: o-ring is inside bottom part, not on insert.
c_alexandersen Modelgun Master
Number of posts : 294 Location / Country : Denmark Registration date : 2011-11-30
Subject: Cartridge drawings Wed Dec 19, 2012 5:51 pm
DISCLAIMER Uploaded drawings are made from measuring samples in my possession. Drawings are intended as information and means for comparing the different cartridges. No scale is given on drawings though most are app. 4:1 when printed on paper size A4 Distance between striker and cap is 0,5mm in all drawings. If you have wishes for additional views or dimensions send me a PM and I will have a look at it as my time permits.
onopi New Member
Number of posts : 15 Location / Country : FRANCE Registration date : 2020-04-05
Subject: cartriges and caps for Beretta M84 Fri May 01, 2020 7:10 am
Hi, I have 3 MGC from Marushin, BERETTA M84, M92 and I wait a S&W mod39 next weeks, I find it "super" and their copy/quality is very good. Now I would work it with cartrige and caps.
I read your post below about cartriges 9.5 , Could you send me how to buy and Where is the seller?
(sorry but I'm sending the same message to the others authors for M92 and S&W)
Tue Sep 14, 2010 7:23 pm
